Culvert replacement costs loom as a budget problem for lawmakers

By Christopher Dunagan, Kitsap Sun Puget Sound Blogs 

While funding for Washington’s “basic education” remains a potential budget-buster, some legislators are beginning to worry about a $2.4-billion financial pitfall involving culverts and salmon streams.

 

Culverts that block significant habitat are represented by dots on the map. Washington State Department of Transportation
Culverts blocking significant habitat are represented by dots on the map of Western Washington.
Washington State Department of Transportation

 

In 2013, a federal judge ordered Washington state to replace nearly 1,000 culverts that block or impede fish passage along Western Washington streams. The $2.4-billion cost, as estimated by the Washington State Department of Transportation, amounts to about $310 million per biennium until the deadline of 2030.

Nobody has even begun to figure out how to come up with that much money, although the WSDOT has pretty well spelled out the problem for lawmakers.

In the current two-year budget, the state is spending about $36 million to replace fish-passage barriers, according to Paul Wagner, manager of the department’s Biology Branch. That’s not including work on major highway projects.

WSDOT is asking to shift priorities around in its budget to provide $80 million per biennium for fixing culverts.

Meanwhile, Gov. Jay Inslee’s 12-year transportation plan calls for increasing revenues to provide money for various improvements throughout the state, including $360 million for culverts spread over the 12-year period.

 

BEFORE, where a 5-foot round culvert carried Twanoh Falls Creek under Highway 106. Washington Department of Transportation
BEFORE, a 5-foot round culvert carried Twanoh Falls Creek under Highway 106 into Hood Canal.
Photo: Washington State Department of Transportation

Even if all that funding comes to pass, the state would only make it about halfway to the goal set by the court when the 2030 deadline passes.

Although funding is a serious matter, the effect of fixing the culverts sooner rather than later could boost salmon habitat and help with salmon recovery, transportation officials acknowledge.

Out of 1,982 fish barriers identified in the state highway system, more than three-quarters are blocking “significant” habitat — defined as more than 200 meters (656 feet). That’s from a fact sheet called “Accelerating Fish Barrier Correction: New Requirements for WSDOT culverts” (PDF 4.6 mb).

 

AFTER, a 20-foot bottomless culvert allows stream to flow more naturally Washington State Department of Transportation
AFTER, a 20-foot bottomless culvert allows the stream to flow more naturally.
Photo: Washington State Department of Transportation

 

As of 2013, the agency had completed 282 fish-passage projects, improving access to nearly 1,000 miles of upstream habitat. Another 10 projects were added in 2014.

Because the lawsuit was brought by 21 Western Washington tribes, the court order applies to 989 Western Washington culverts, of which 825 involve significant habitat. The case is related to the Boldt decision (U.S. v Washington), which determined that tribes have a right to take fish, as defined by the treaties, and that the state must not undermine the resource.

The court adopted a design standard for culverts known as the “stream simulation” model, which requires that the culvert or bridge be wider than the stream under most conditions and be sloped like the natural channel.

In an effort to gear up for culvert work, the Department of Transportation established four design teams to prepare plans for 34 fish-passage projects for the next biennium and scope out another 75 projects. State officials hope that by having teams to focus on culverts and bridges, design work will become more efficient. Agencies also are working together to streamline the permitting process.

In Kitsap County, the Highway 3 culvert over Chico Creek presents a real challenge for the department, Paul Wagner told me. Everyone recognizes the importance of Chico Creek, the most productive salmon stream on the Kitsap Peninsula. But replacing the undersized culvert with a new bridge would cost more than $40 million — more than the entire budget for culverts in the current biennium.

 

A culvert under Kittyhawk Drive was removed last summer next to the Highway 3 culvert. Kitsap Sun photo by Larry Steagall
A culvert on Kittyhawk Drive was removed last summer next to the Highway 3 culvert, which continues to affect the flow of Chico Creek.
Kitsap Sun photo by Larry Steagall

 

“There are a lot of culverts,” Wagner said, “and our challenge is that those on the state highway system are more complicated and involved.”

Not only are the state highways the largest, he said, but they usually cannot be shut down during construction. State highways typically have more complicated utilities and drainage systems, and work may require buying new right of way.

Those are all issues for Chico Creek, which was rerouted when the highway was built in the 1960s. The stream was directed into a new channel parallel to the highway, crossing under the roadway at a 90-degree angle.

The new design would restore the original channel, crossing under the road at a steep angle that makes for a longer bridge. The new route also could involve changing the interchange at Chico Way.

“That project is definitely one we need to get at,” Wagner said, “but it eats up a lot of the money we need for other projects.”

Removal of a county culvert under Kittyhawk Drive has increased interest in removal of the state highway culvert, which lies immediately upstream of the newly opened channel where the county culvert was removed. See Kitsap Sun(subscription), Aug. 26, 2014.

The Legislature will determine how much money will be allocated to culverts and to some extent which ones get replaced first. New taxes could be part of the equation for the entire transportation budget, a major subject of debate this session.