Indians 101: Tulalip Canoes (Photo Diary)

By Ojibwa for Native American Netroots

For the Salish-speaking tribes of the Washington coast, canoes were traditionally not only their most important form of transportation, they were also cultural icons. The Hibulb Cultural Center and Natural History Preserve honors the Tulalip (Snohomish, Snoqualmie, Skykomish, and others) cultures.

8927 photo DSCN8927_zps8c1d3ff8.jpg

 

8900 photo DSCN8900_zps68cae51f.jpg

The importance of canoes to the Tulalip peoples is evident in the Hibulb Culture Center. The canoe theme shown in the windows above is repeated throughout the Center.

Canoes were made by hollowing out a single log with fire and adzes. By filling the hollowed out log with hot water, the canoe makers could then widen the canoe by forcing stout cross-pieces between the gunwales.

Carving a canoe begins with spiritual preparation: the carvers must prepare themselves with fasting, prayers, and the sweatlodge. It is not uncommon for the task of carving a large canoe to take two years. Once the log is chosen, a prayer is said for the cedar and an offering is given to thank it for its sacrifice.

The final stage in carving the canoe involves the use of hot rocks and water to steam-bend the sides outwards. This steaming also draws the bow and stern upwards as well as adding strength to the vessel. For the large ocean-going canoes, the prow and stern pieces are added last, the thwarts and seats are installed, and the exterior is finished. Then the canoe is given a name and is ready to begin its life on the water.

8902 photo DSCN8902_zpsfbf9ec97.jpg

Three canoes are displayed in the Center.

River Canoe:

8869 photo DSCN8869_zps29ca94fd.jpg

The river canoe shown above was carved about 1880 by William Shelton. It was restored by the Tulalip Tribes Carving and Arts Department.

8914 photo DSCN8914_zps4f5bd3b1.jpg

8915 photo DSCN8915_zpsc0d6118a.jpg

The bow of the canoe is shown above.

Small Canoe:

8878 photo DSCN8878_zps33fbad36.jpg

8912 photo DSCN8912_zps5ccaae6b.jpg

This small canoe was carved about 1930 from a single log by William Shelton.

Ocean-Going Canoe:

8887 photo DSCN8887_zps1df7aa86.jpg

This canoe was made about 1880 as part of a wedding dowry. The canoe was built by the bride’s family from the Quinault Nation and given to the Tulalip groom is a wedding present.

8888 photo DSCN8888_zps11c7a37c.jpg

Shown above is a detail of where the mast would have been placed. Sails, prior to the arrival of the Europeans, were made from woven mats.

8889 photo DSCN8889_zps8732ec07.jpg

8906 photo DSCN8906_zps83897529.jpg

The canoe was made from hollowing out a single large cedar log. The sides were then spread apart and the bow and stern pieces were then added.

8911 photo DSCN8911_zpsdcf985b9.jpg

The bow is shown above.

8904 photo DSCN8904_zpsa6f8483c.jpg

The stern of the canoe is shown above. The stern piece was added to the dugout form.

8905 photo DSCN8905_zps0c17e28b.jpg

The photograph above shows the additional piece which was added to the gunnels.

8907 photo DSCN8907_zps2e0295b5.jpg

The photograph above shows how the thwarts (i.e. seats) were attached.

8944 photo DSCN8944_zps34cdf5f5.jpg